<p>How I converted my rigid heddle loom into a 4 "harness" string heddle bar floor loom using foot pedals. I used 2 - 1 x 4 fir boards for the main uprights and pedals, the rest is dowels.</p>

Added by: rigidheddleweaving
Tags: converted, rigid, heddle, loom, harness, string, bar, weaving, spinning, weft, shuttle, warp, treadle, houndstooth
Date: 2010-01-28

<p>As the title suggests. I go into detail about how to read a weaving draft. If you still don't understand this, contact me and I'll do my best to help!</p>

Added by: rigidheddleweaving
Tags: how, to, read, weaving, draft, pattern, handweaving, rigid, heddle, loom, harness, string, design
Date: 2010-01-25

<p>Weaving with string heddles on a rigid heddle loom frame. Easier than you think!</p>

Added by: rigidheddleweaving
Tags: fear, not, string, heddles, rigid, heddle, loom, frame, rigidheddleweaving, spinning, pattern, texture, draft
Date: 2010-01-28

<p>This is how I make warp chains using a warping board. I like to use my inkle loom as a warping board.</p>

Added by: rigidheddleweaving
Tags: warp, chain, warping, board, inke, loom, peg, pegs, rigidheddleweaving, rigid, heddle, weaving
Date: 2010-02-10

<p>In this video I show you how to make plarn which is great for the environment! Make all kinds of things out of shopping bags! Eventually, I want to make a raincoat out of this stuff!</p>

Added by: rigidheddleweaving
Tags: how, to, make, plarn, rigid, heddle, weaving, plastic, yarn, repurpose, recycle, shopping, bag, tote, project
Date: 2010-01-25

<p>This is a child's loom, so cute and easy to weave on. It's a rigid heddle on a counterbalance mechanism. I'll be applying this same principal of the counterbalance mechanism to my full size rigid heddle loom frame. Can't wait to get started building it.</p>

Added by: rigidheddleweaving
Tags: counterbalance, loom, brio, rigid, heddle, conversion, plarn, weaving, weaves, rigidheddleweaving
Date: 2010-02-01

<p>In this video I will show you weaving with a pick up stick behind the heddle to achieve a pattern in the weave. The stick is going 2 under and then 2 over the slot threads. I move the stick forward with the heddle up and pass the shuttle through the shed. Then I put the heddle in the up position again, but move the stick back and pass the shuttle through the shed. Then I move the heddle down and pass the shuttle though the shed. This process is repeated to achieve the pattern shown in the video.</p> <p>I hope this video has helped someone. I couldn't find any videos or clear instructions with photographs anywhere showing this procedure. </p> <p>If you know of a video showing how to make patterns in the weave using a pick up stick, please, please contact me...because I have spent hours on the internet searching for this and the only things I could find were "Buy my Book" kind of links or vague written instructions that I couldn't wrap my head around especially since there were no accompanying videos/pictures.</p> <p>...I am an avid Google user and I could NOT find any FREE information ANYWHERE about this procedure which included photographs and/or videos.</p> <p>So, if you like to support FREE information via the internet, please stop by <a href="http://rigidheddleweaving.com">http://rigidheddleweaving.com</a> and <a href="http://tabletweaver.com">http://tabletweaver.com</a> when you have time! :)</p> <p>Pattern Code: U = Heddle Up D = Heddle Down U+S = Heddle Up and Stick forward (flat) SE = Heddle neutral with stick forward but turned on edge ---------------------------------------- Warp: Pick up every other thread. U, D, U+S, D, U, SE. Repeat. ---------------------------------------- Warp: Pick up 2, Skip 2. U, SE, U, SE, U, D, U+S, D, U+S Repeat.</p>

Added by: rigidheddleweaving
Tags: pattern, texture, weaving, pick, up, stick, rigid, heddle, loom, rigidheddleweaving
Date: 2010-01-28

<p>Easy to weave...tromp as writ...weave the weft the same as the wrap! For pinwheel, alternate 2 dark and 2 light colored threads in the warp and weft, that's all there is to it!</p>

Added by: rigidheddleweaving
Tags: tromp, as, writ, weaving, rigid, heddle, loom, pinwheel, houndstooth, pattern, rigidheddleweaving
Date: 2010-01-28

<p>How to make terry type cloth. This is great for spa cloths, rugs, or any project depending on the type of yarn/thread you use. Experiment and have fun!</p>

Added by: rigidheddleweaving
Tags: pile, loop, weaving, terry, cloth, rugs, rigidheddleweaving, rigid, heddle, weave, loom
Date: 2010-01-24

<p>How to achieve different patterns and textures in weaving on a rigid heddle loom using a pick up stick and PICK UP STICK CONTROL tutorial. Have fun experimenting!</p>

Added by: rigidheddleweaving
Tags: pick, up, stick, control, rigid, heddle, weaving, loom, patterns, textures, designs
Date: 2010-01-25

<p>For weaving with double heddles without a kit or just for easier weaving (no lifting up or pushing down the heddles by hand). I find this saves my back from the pushing and pulling of the heddles, especially with 2 of them which have a bit of weight to them. I am also short and this saves me from having to reach clear across the loom to use the shed blocks.</p>

Added by: rigidheddleweaving
Tags: pedal, shed, stick, double, rigid, heddle, loom, weaving
Date: 2010-01-24

<p>I didn't want to wait and order a reed for my converted loom so decided to try and make my own. This was the process. It turned out that placing a block in the middle (to knock out later) helped keep the wood from bowing in the middle and an epoxy like Duco Cement was far superior to using hotglue to secure the threads.</p>

Added by: rigidheddleweaving
Tags: home, made, reed, rigid, heddle, loom, weaving, rigidheddleweaving
Date: 2010-01-26

OK, not Rigid Heddle Weaving but weaving is weaving and I don't know a weaver with only one loom! LOL A couple of people on the Facebook Page mentioned they are new to inkle loom weaving so I thought I'd create this quickie demo for making a design on an inkle loom by picking up selected pattern threads. It's really easy once you see how it's done. I hope this video helps someone. Enjoy and happy weaving!

Added by: rigidheddleweaving
Tags: pick, up, inkle, loom, weaving, pattern, easy
Date: 2010-09-13

<p>This is how I warp my counterbalance loom back to front. This same technique can be used on your rigid heddle loom frame as well. Once the warp threads are "beamed" then you pull them through the heddles from the back to the front by sitting at the front of the loom. The next time I warp, I'll make a video showing the next step but for now I'm anxious to get weaving :)</p>

Added by: rigidheddleweaving
Tags: warp, back, front, heddles, counterbalance, lease, sticks, loom, rigid, weaving
Date: 2010-02-10

<p>Weaving materials where you least expect it! Plastic bags, t-shirts, socks, pant legs...anything that's a tube can be cut into a continuous strip for weaving.</p>

Added by: rigidheddleweaving
Tags: plarn, weaving, materials, t-shirt, pants, socks, rag, rug
Date: 2010-09-14

Don't have a warping board? Think again!

Added by: rigidheddleweaving
Tags: rigid, heddle, weaving, harness, loom, warping, board, string
Date: 2010-02-12

<p>This is the next part of warping back to front. After beaming your warp, move the lease sticks towards the front of the loom right behind the shafts. This makes it easy to see which thread comes next in the threading order. Threading is even easier if you count the SHAFTS and NOT the heddles ;)</p>

Added by: rigidheddleweaving
Tags: warping, back, front, rigid, heddle, counterbalance, loom, beaming, weaving, weaver, woven
Date: 2010-02-12

This is how to double weave with 2 rigid heddle reeds. You can either double your sett, weave cloth wider than your loom, weave two cloths at the same time or create a tube. Enjoy!

Added by: rigidheddleweaving
Tags: double, heddle, reeds, weaving.tube
Date: 2011-04-10

After making a thread holder to make a warp chain in record time, I used it to make a yarn cake in record time.

Added by: rigidheddleweaving
Tags: thread, holder, warp, warping, yarn, cake, inkle, loom, rigid, heddle, weaving, weave
Date: 2010-09-11

How to sley a rigid heddle reed from a warp chain. Much easier than direct warping IMHO

Added by: rigidheddleweaving
Tags: rigid, heddle, reed, sley, weaving, warping
Date: 2011-04-19